Q328 RUBBER BELT SHOT BLASTING MACHINE

Trong kho còn: 100 sản phẩm

Hotline: 0336.031.688

The Q328 Shot Blasting Machine is a rubber track-type shot blasting machine specially designed for cleaning and surface treatment of metal components. With a production capacity of 1.2–2.0 tons/hour, a maximum workpiece weight of 15kg, an Φ800mm end plate diameter, and a shot blasting capacity of 220kg/min, the Q328 effectively removes rust, oxide scale, casting sand, and other contaminants, making it suitable for the foundry, mechanical manufacturing, and metal processing industries.

Số lượng:

Thêm vào so sánh

Add to Cart

Buy now

Yêu cầu báo giá

Mô tả sản phẩm

Q328 RUBBER TRACK SHOT BLASTING MACHINE

Product Introduction

The Q328 Shot Blasting Machine is a rubber track-type metal surface treatment machine, designed for batch cleaning of medium-sized and medium-weight metal components. The machine uses high-speed steel shots to impact workpiece surfaces, effectively removing rust, oxide scale, casting sand, burrs, slag, and other contaminants.

During operation, workpieces are loaded into the blasting chamber and continuously tumbled on the rubber track. This allows the steel shots to reach multiple areas of the workpieces, improving cleaning efficiency and achieving a more uniform surface finish.

With an Φ800mm end plate diameter, 0.2m³ effective volume, and a production capacity of 1.2–2.0 tons/hour, the Q328 is suitable for processing castings, forgings, stamped parts, mechanical components, and other metal products with a maximum weight of 15kg per piece.

Key Features

1. Wear-Resistant Rubber Track

The Q328 uses a specialized wear-resistant rubber track to transport and tumble workpieces inside the blasting chamber. The tumbling mechanism allows steel shots to reach multiple areas of the workpiece surface, improving overall cleaning efficiency.

2. Maximum Workpiece Weight of 15kg

The machine can process workpieces with a maximum weight of 15kg per piece, making it suitable for various medium-sized castings, forgings, stamped parts, and mechanical components.

3. Φ800mm End Plate Diameter

The Q328 is equipped with an Φ800mm end plate, providing a larger cleaning space and allowing the machine to process workpieces that are larger and heavier than those typically handled by Q324 and Q326.

4. Production Capacity of 1.2–2.0 Tons/Hour

The Q328 provides a production capacity of approximately 1.2–2.0 tons/hour, making it suitable for production lines requiring high-volume processing of metal components.

Actual production capacity depends on the size, shape, material, surface condition, and required cleaning level of the workpieces.

5. Shot Blasting Capacity of 220kg/min

The machine has a shot blasting capacity of approximately 220kg/min, generating a strong and continuous flow of steel shots to effectively remove rust, oxide scale, casting sand, and other contaminants from workpiece surfaces.

6. Ventilation Capacity of 2,600m³/hour

The Q328 has a ventilation capacity of approximately 2,600m³/hour, helping remove dust and contaminants generated during the shot blasting process and supporting the dust collection system.

7. Approximately 19kW Total Power

The total power of the Q328 is approximately 19kW, excluding the dust collection system, providing sufficient power for continuous industrial operation.

Technical Specifications

Item	Q328 Specifications
Model	Q328
Machine Type	Rubber Track Shot Blasting Machine
Production Capacity	1.2–2.0 tons/hour
Maximum Workpiece Weight	15kg/piece
End Plate Diameter	Φ800mm
Effective Volume	0.2m³
Shot Blasting Capacity	220kg/min
Ventilation Capacity	2,600m³/hour
Total Power	Approximately 19kW
Dust Collection System	Not included in total power
Cleaning Method	Shot blasting combined with workpiece tumbling
Applicable Workpieces	Castings, forgings, stamped parts, mechanical components, and metal products

Note: The above specifications are based on the Q328 configuration provided by the customer. Actual specifications may vary depending on equipment configuration, manufacturer, and specific workpiece processing requirements.